(1) The product is produced with the SBS and bitumen as raw materials, using polyethylene film, aluminum foli coated

on the upward or no file(both side sel-adhesive) while self-adhesive protection layer on the downward surface.  It has a widely prospect

new construction waterproof materials . It has such properties as good self -adhesion, no leaking, cold flexibility, especially in self-adhesion.

That is unique product in waterproof and application.

(2) Advantage

1. Self adhesive without bonding agent and torching

2. Good rubber elasticity and elongation

3. Excellent binding power

4. good self-coalescence

5. Safe application , no pollution

6. Excellent waterproof and high strength

7. Available for wet ground

(3) Usage

    It widely used for the waterproof and damp proof of the roofs, basements , swimming pool, tunnels,etc of industry and house building,

and the waterproofing of wooden and metal structure roof. The fire is strictly forbidden.

(4) Construction Method

  Ensure all surfaces are clean, dry and dust-free. Remove any loose particles, and any rusrt with a wire brush and soft broom

Roll out the membrane

Remove the backing paper and place the adhesive side to previously prepared surface,

To ensure a tight contact-smooth the tape down with a dry cloth, removing all the air bubbles

Press the tape to the surface firmly once in position

Smooth flat all edges with a wallpaper roller or trowel

After use reseal pack and store upright in cool, dry condition.

wood